| Pictures | Description | Condition |
|---|
500-3832
|
JCI HD scalp screen. Bare screen, no drive. No sub frame. |
Was operating in plant when shut down. Reported good condition, but no motor or drive. No subframe. |
500-3830
|
Peerless 4 x 8-2dk Screen on stand with 7.5hp drive and underhopper. |
Good condition |
500-3825
|
El Jay 5 x 14-3dk inclined screen. Includes subframe |
Fair. Bearings quite, turn easy. |
500-3805
|
El Jay 5 x 16-3dk horizontal three shaft screen complete with base frame and drive. |
Good. Was in operation until plant shut down 1 yr ago. |
500-3781
|
Nordberg 6 x 16-3d portable inclined screen on tandem axle chassis
|
Good running condition |
500-3758
|
Hewitt Robins 6 x 20-2dk inclined screen on skid stand with drive, walkways.
|
Good. |
500-3757
|
Tyler 6 x 16-2dk Ty Rocket scalp screen on skid stand w/motor. Punch plate in top deck, screen in bottom. Underscreen hopper. |
Good |
500-3755
|
Fab Tec 4 x 12-2dk Pro Screen on skid stand w/underbelt. Punch plant in top deck, 1-in in bottom deck. 36-in. underbelt. Includes chutes for top and second deck. |
Very good. Ready to work. Side plates, screen rails, bearings, seals in good condition. |
500-3748
|
5 x 12-2dk CEC inclined screen on skid stand. Ball deck on lower deck. 48 in. underbelt. |
Good. |
500-3724
|
El Jay 5 x 16-2dk bare screen on subframe with drive and motor. |
Good. Checked over, bearings and seals good |
500-3653
|
El Jay 5 x 16-3dk screen plant on single axle chassis with wash bars and cross conveyor for 2d deck overs, 48" screen underbelt discharges to rear. Conveyor rack for top deck overs side discharge conveyor. Chute for 3rd dk overs. Walkways and boarding ladder. |
|
500-3650
|
2 ea 1997 Cedarapids 6x20-3dk bare screens with rebuilt drives. |
Excellent. Drives just rebuilt. Will be sandblasted and painted prior to shipping. |
500-3601
|
El Jay 5 x 14-2dk heavy duty horizontal three shaft scalp screen mounted on tandem axle chassis with underscreen conveyor and 24 in. 2d dk cross conveyor. 3 in. and 2 in. screen in top deck, 1/2 in. Z wire in bottom deck. 25HP 1200 rpm motor. |
Owner reports very good. Bearings good, no leaks. Roadworthy. |
500-3413
|
4 x 10-3deck Thunderbird inclined screen on subframe with 10hp motor and drive. 1 in. screen cloth on top deck, 3/4 in. on 2d deck. |
Good |
500-3351
|
CEC 5x16-3dk bare wash screen with drive. |
Good |
500-3303
|
Symons 5x16-3dk portable screen plant with 36 in. x 24 ft. discharge conveyor. On plant switch gear. Single axle chassis with 10:00 x 20 tires. Lights, brakes. Excellent condition -- under 6 mos use since new |
Like new condition. Built in 1996, but only used 6 mos. No signs of wear. |
500-3212
|
Clemro 4x12-2dk HD inclined scalping screen. On subframe with 25hp electric motor and drive. Upper deck is 2 in. rubberized punch plate with 4 in. and 8 in. openings, bottom deck is 2 ea 72 in. screens with 1 1/2 in. openings. |
Excellent condition. Shows little wear. Has less than 5 years use.
|
