Jaw Crushers Complete Plants Impact Crushers Screens Wash Plants Conveyors
Tandem Plants Cone Crushers Rolls Crushers Self Contained Feeders Misc
PicturesDescriptionCondition
200-3843

CR MVP 280 portable cone plant on tandem axle chassis with 200hp electric drive. Dual hydraulic legs. 42in. rear discharge underbelt. Buyer's choice new liners.
200-3828

El Jay 1140 plant with 54" std. cone, 5 x 16-3dk horizontal screen. Screen 48" rear discharge conveyor, cone discharge to side. Electric drive. Good condition. In use now
200-3824

Nordberg 48 in. Gyradisc bare cone crusher. Includes control panel, feed distribution plate. Fair
200-3813

El Jay 1145 portable closed circuit cone plant with 45in. Classic Std. Rollercone, 5 x 16-3dk Horiz. screen w/48in. underbelt. 125hp elec.drive to cone, 30hp to screen. Closed circuit on tandem axle chassis Excellent. Just completely reconditioned w/new upper thrust bearing, new lower radial bearing, relief cyls rebuilt, new bonnet support skirt. Ready to work. Roadworthy.
200-3808

Telsmith 48S standard cone on stand with drive and underbelt.

Sale Price: $39,500 - Call Dick Rehmke 206-930-5025
Reported good condition. In use when plant was recently shut down
200-3767

Kue Ken 36in. Gyratory closed circuit cone plant with El Jay 4 x 14-3dk screen. On single axle chassis with electric drive.

Sale Price: $60,000 - Call Dick Rehmke 206-930-5025
Very good condition. Cone recently rebuilt by Newell Machine Works.
200-3763

Cedarapids MVP 380 bare cone with electric control cabinet, cooler and motor. Fine liners 90 - 95% left. Good running condtion. In service until recently replaced with larger unit. 50% medium liners.
200-3762

Cedarapids MVP 450 bare cone. Complete with cooler, electric control cabinet. Good condition In service until recently replaced with larger unit. Good running condtion. In service until recently replaced with larger unit. 50% medium liners.
200-3750

2001 Clemro XC 1100 closed circuit cone plant with Clemro 1100 XC std. auto adjust 40" cone and 5 x 16-3dk horizontal three shaft screen. Feed, discharge & product conveyors. Closed circuit on three axle chassis with 150hp electric drive to cone, 30hp to screen. Hydr. set up jacks, electrical panels included. Excellent. Like new condition.
200-3715
Nordberg standard cone plant
Nordberg 4 1/4 standard cone plant on tri axle chassis with 200hp electric motor and discharge conveyor. Excellent condition. Located British Columbia.
200-3702
Symons gyrodisc bare cone crusher
El Jay 1316 cone plant with ElJay 54in std. rollercone, El Jay 6x20-3dk horizontal three shaft screen. On tri axle chassis, open circuit, with screen rear discharge and front crusher discharge conveyors. 200hp electric motor for cone, 40hp for screen. Has fixture for booster axle. Very good condition. In use now. Cone recently rebuilt. Screen has new side plate
200-3678
Symons gyrodisc bare cone crusher
Symons 36 in. Gyrodisc bare cone crusher with 100hp electric motor. Includes lube pump, 100 gallon oil reservoir tank, Extra set new very fine liners, slinger hopper. Manual says feed size of 1 1/2 in. to make 1/2 in. to 20 mesh in close circuit. Reconditioned in 1989. Liners 95% left.
200-3675
Tri axle cone carrier
New just-built tri axle cone carrier built for JCI 300 cone. Located Vancouver, B. C. New.
200-3670
El Jay cone
1974 45" El Jay FH cone model WRC45FH SN 667. Mounted on single axle chassis with air brakes and 30" front discharge cone underbelt. 125hp electric motor. Reported good. Appears well taken care of. Sitting for some time and underbelt is checked. Tires need replacement before hiway travel.
200-3539
Symons standard cone
Symons 4 ft. standard cone with 150hp electric motor on tandem axle chassis with single axle rear booster. Closed circuit with El Jay horiz. 5 x 14-2dk screen with underscreen product conveyor, under cone conveyor and off plant close circuit return con
veyor.
Excellent condition. Cone was reconditioned my Metsos Mtls. 300 hour ago.